Gearing

Chain & Drives provides a comprehensive range of standardised gearing components, designed for use for all types of industrial machinery. 

Straight Bevel Gear:

Gear

Straight bevel gears have tapered conical teeth which intersect the same tooth geometry. Bevel gears are used to transmit motion between shafts with intersecting center lines. The intersecting angle is normally 90 degrees but may be as high as 180 degrees. When the mating gears are equal in size and the shafts are positioned at 90 degrees to each other, they are referred to as miter gears. The teeth of bevel gears can also be cut in a curved manner to produce sprial bevel gears, which produce smoother and quieter operation than straight cut bevels.

 

Spiral Bevel Gear:

gear

Spiral bevel gears have a helical angle spiral teeth.

 

Screw Gear (Crossed Helical Gear):

Gear

Screw gears are helical gears of opposite helix angle will mesh when their axes are crossed. 

 

Products

 

  • Gear Racks

    Chain & Drives offer a range of stock racks in either D.P. (Inch) or Module (Metric), Sizing from 16 - 5 DP and 1.5 - 5 Module, these racks are manufactured from CS1020 steel material and have a pressure angle of 20 degrees.

  • Spur Gears

    Chain & Drives have on offer a range of stock spur gears in either D.P. (Inch) or Module (Metric) sizing from 16 - 6DP and 1.5 - 4 Module.

  • Bevel Gears

    Chain & Drives stock a range of Bevel Gears in either D.P. (Inch) or Module (Metric), these gears are available in sizes from 12DP - 6DP and 1.5 - 4 Module and are manufactured from S1045 steel material, pressure angle 20 degrees.

  • Mitre Gears

    Chain & Drives stock a range of Mitre Gears in either D.P. (Inch) or Module (Metric), these gears are available in sizes from 32DP - 3DP and 1.5 - 4.0 Module and are manufactured from S1045 steel material, pressure angle 20 degrees.

 

resources